User's Manual

SECTION 3: INSTALLATION INSTRUCTIONS
516.80548.POM_REVA_Product_Owner's_Manual_M64780D25_FCCRpt.doc Page 19 of 44
ECN-5277
44
Figure 13: VIU Connections
To connect the VIU power supply, perform the following steps:
Step 1 Route the VIU’s power supply cable from the driver compartment to the trunk
compartment.
Step 2 Connect the red (#12 AWG) wire via an in-line fuse from the VIU power cable to
the relay as shown in the figure above.
Step 3 Attach the black (#12 AWG) wire of the VIU power cable to the ground connection
on the vehicle chassis.