Installation Guide

MDCMR-Guide.doc\4-Sep-03 Page 3 of 20
SLIP2IPMN Dial-up Network Connection Installation
This section provides step-by-step instructions on how to install the IPMN Radio SLIP Port Driver onto the MDC for connection
to an IPMN IPSeries Mobile Radio. This setup will also facilitate adding a VIU to the configuration. It will also provide
instructions on configuration and settings for the SLIP port to function properly.
NOTE
: The screens shown were captured using Windows 98
tm
. Differences between Windows versions will be noted.
Step 1 At the computer desktop, double click
on the MyComputer icon.
Step 2 Insert the IPMN Radio SLIP Port Driver
Installation diskette labeled SLIP2IPMN.exe in the
floppy drive.
Step 3 Double click on the A:\ drive.
Step 4 Double click on the SLIP2IPMN file.
Step 5 At the WinZip Self-Extractor window, click on the U
nzip
button to begin the unzip process.
NOTE
: The zipped file will self-extract and install the radio
port driver files on the MDC.
Step 6 Click on the OK button after self-extraction is
complete.
Step 7 Click on the C
lose button to continue.
Step 8 Close the A:\ drive folder by clicking on the at the top
right-hand corner of the window.
6 file(s) unzipped successfully
SLIP2IPMN