Installation Guide
MDCMR-Guide.doc\4-Sep-03 Page 12 of 20
Step 14 Under the General tab, under Us
e the following IP
address: enter the MDC IP address. This IP address
should conform to the address table established by the
system administrator.
NOTE
: The MDC, VIU, and Radio IP addresses must
be unique.
Click on the Adv
anced... button.
Step 15 Under the General tab, select Use default gateway on
remote network and deselect Us
e IP header
compression. Click on the OK button. On the Internet
Protocol (TCP/IP) window, click on the OK button.
Step 16 On the SLIP2IPMN Properties window, click on the
Options tab and deselect P
rompt for name and
password, certificate, etc. Deselect Prompt for phone
n
umber.
Step 17 Click on the Security tab and under Interactive login
and scripting, select R
un script: and click on the
Browse... button.
Step 18 Select the following path and file name:
C:\Program Files\IPMobileNet\\nodial.scp
Click on the Open button. On the SLIP2IPMN
Properties window, click on the OK button and the
properties window will close.
Proceed to ‘MDC-to-Radio Connection & Settings’ on page 16.
192 . 168 . 1 . 5
SLIP2IPMN Properties
SLIP2IPMN Properties