User's Manual

SECTION 3: INSTALLATION INSTRUCTIONS
M64450G25-FCCRpt.doc Page 20
Base Station Setup for Testing
The system must be programmed with the customer’s parameters before any tests are made on
the mobile radio.
To prepare the base station to be used in the mobile radio test, perform the following steps:
Step 1 On the laptop at the Windows desktop, click on the Start button and select
Accessories, Communications, and HyperTerminal.
Step 2 Power up the base station.
First-time users must enter the customer’s operating parameters into the base station
with HyperTerminal (refer to the IPSeries High Speed Base Station System Manual
for instructions and the client’s system documentation for parameters).
a
Ensure that the calibrated base station and the mobile radio antennae are separated
by at least 10 feet. If the antennae are too close, the mobile radio receivers may be
overloaded by the transmitters resulting in intermittent communications and high data
errors.