User's Manual

MDCMR-Guide.doc\4-Sep-03 Page 18 of 20

To access Advanced Dial-Up options, the Do not allow Internet

programs to use this connection selection must be deselected. To

deselect, perform the following steps:

Step 1 Click on the Start button, select Settings, Control

Panel.

Step 2 Double click on the Internet Option icon.

Step 3 On the Internet Properties window, click on the

Connections tab. Select Always dial my default

nnection. Highlight SLIP2IPMN, and click on the

Settings... button.

Step 4 Deselect the Do not allow Internet programs to use this

connection. Click on the Advanced... button.

Step 5 Ensure the Disconnect features are not selected

Step 6 Click on the OK button. On the Setting window, ensure

that the Do not allow Internet programs to use this

connection is selected.

Click on OK twice and close the window by clicking on the ⌧ in

the upper right-hand corner of the window

As previously stated, the Use default gateway on remote network

selection must be removed. Perform the following steps to

deselect (refer to Page 15, Step 17 to see the appropriate

screens).

Step 1 At MDC desktop, click on the Start button, select

rograms, Accessories, Communication, and Dial-

up Networking.

For Windows 2000

, select Network and Dial-up

Connections.

For Windows XP

, select Start, All Programs,

Communication, and Network Connections.

Step 2 Right click on the SLIP2IPMN Dial-up Network

connection and select Properties.

Step 3 Click on the Server Types tab. For Windows 2000 &

XP, select the Networking tab.

Step 4 Click on the TCP/IP Settings... button. For Windows

2000 & XP, click on Internet Protocol (TCP/IP),

Properties, and on the Advanced button.

Step 5 Deselect Use default gateway on remote network.

Step 6 Click on the OK button. Click on OK again. For

Windows 2000 & XP

, click on OK one more time.

Step 7 Close the Dial-up Network window.

SLIP2IPMN Settin

SLIP2IPMN Settings