User's Manual

MDCMR-Guide.doc\4-Sep-03 Page 11 of 20
Step 8 Under Completing the Network Connection Wizard,
under T
ype the name you want to use for this
connection: type SLIP2IPMN. Select Add a s
hortcut to
my desktop and then click on the Finish button.
Step 9 On the Connect SLIP2IPMN window, click on the
Pro
perties button.
Step 10 On the SLIP2IPMN Properties window, under the
General tab, deselect Us
e dialing rules. Under Connect
using: click on the C
onfigure... button.
Step 11 Select Enable hardware flow control and click on
the OK button.
Step 12 Click on the Networking tab and under Type
of dial-
up server I am calling: select SLIP: Unix Connection.
Step 13 Under C
omponents checked are used by this
connection: highlight Internet Protocol (TCP/IP) and
click on the Pr
operties button.
SLIP2IPMN
Connect SLIP2IPMN
SLIP2IPMN
SLIP2IPMN
SLIP2IPMN