User Manual

~\Technical Documentation\Install_Guides\MR-Guide\3-Jan-02 Page 3 of 14
INSTALLATION REQUIREMENTS
PL502-82019-51 - INVADR MOBILE ACCESSORY KIT -- An INVADR Mobile Radio includes the following
components (part of mobile top assembly):
Qty Description IPMN Part Number
1 Cable, Power Extension 502-82020-53
2 ‘L’ Brackets 50026749
2 Screws Skt Cap Button Head 10-32 X 5/8 37081032-10
6 Washers Split Lock #10 271-0062-010
2 Washers Fender 1” O.D. X .28 I.D. X .05 THK 271-0059-001
4 Washers Rubber 1” O.D. X .65 I.D. X .12 THK 36040001
2 Hoses, Rubber Black .380 O.D. X .191 I.D. X .3 34010295
4 Screws Self-Tapping #10 X 5/8 37040010-10
0 Installation Manual 516-80307
0 Technical Manual 516-82025
PL502-80208-51 - INSTALLATION KIT – The following components are required for an INVADR Mobile
Radio Installation and are available for purchase through IPMobileNet, Inc.
Qty Description IPMN Part Number
1 EMI Filter 127-0020-001
1 Timer, 2 hours 150-0127-001
1 Relay 128-0117-001
1 Relay Socket 128-0116-001
2 Butt Connectors #8 AWG 120-0256-001
1 Terminal, Ring #8 AWG, #10 Screw Insulated 120-0127-001
4 Terminal, Ring #18-22 AWG, #10 Screws Insulated 120-0250-004
4 Terminal, Ring #10-12 AWG, #10 Screws Insulated 120-0250-005
4 Terminal, Disconnect #14-16 F 120-0244-002
18 Terminal, Disconnect #10-12 F 120-0244-003
2 Disconnect Tab, Quad Male 200-1377-001
1 Wire, 12 AWG Black, order 5 ft. 156-0242-001
1 Wire, 12 AWG Red, order 44 ft. 156-0242-003
1 Fuse, 30 AMPS ATO 122-0042-001
1 Fuse Holder, 30 AMPS 120-0253-001
1 Switch, Toggle DPST 144-0136-001
1 Diagram, Mobile Installation without VIU 502-80259
1 Diagram, Mobile Installation with VIU 502-80260
1 Diagram, Mobile Installation with Data 911 and VIU 502-80306