User's Manual

F32700N25.doc Page 25
time= 1000 ms, uplink size=41, downlink size= 41, timeout= 120 sec, select
HI-Res, then select OK.
Step 2 Observe the data quality readings on the IPMessage window of the PC
connected to the radio using the V (for Verbose) command in the IPMessage
program. With the fixed radio's antenna connected to receiver, verify the
received data quality readings are consistently higher than 220. Data quality
readings should also be verified at the base station using the V command on
the Hyper-terminal window. Record this data on the Test Data Sheet.
Step3 Read the value of message success rate on the active plot table and record it.
This value should be greater than 95% for both uplink and down link.