User's Manual

Code: Installation Guide EZPRO25 RF.d
o
INSTALLATION
GUIDE
Date: 12/18/2007 Page: 21 of 21
Initial Release
Revision: 00
8.2 ALARMS WITHOUT STATUS LEDS
8.2.1 Interference at the bsr.
This alarm is monitored in APCO P25 Network Management System (NMS). See “APCO P25
Event List” in NMS help.
An interference in the EZPRO25 RF is activated when a high number of invalid consecutive
receptions occurs at a EZPRO25 RF. An invalid reception is that which has a signal level higher than
the minimum level of reception of the carrier, but it is not recognised as a APCO P25 signal.
This alarm is switched off upon correct reception.