User's Manual

FCC ID: MI7-ECSHPA80TX
A5
•
In enclosed racks, do not “box in” the HPA8 with large equipment mounted above
and below it. This restricts airflow to a small area, and may cause overheating of
both the HPA8 and the adjacent equipment.
•
Use the appropriate size power cables and power supply.
3.2.1 Typical Rack Installation
In most installations, the HPA8 is mounted vertically on an unpainted 10 ½” high rack
panel, and installed in the rack. The fan side of the unit faces the bottom of the rack, so
that cool air is drawn in from the bottom and expelled toward the top. Please refer to
Figure 3.1 Typical Rack Installation for details.
Figure 3.1 Typical Rack Installation