User's Manual

CHAPTER 1: INTRODUCTION

516.80540.UM-Rev. D 1-Jun-07 Page 9 of 38

Product Specifications

TABLE 4: PRODUCT SPECIFICATIONS

PARAMETER SPECIFICATION

Frequency Range TX 700 MHz (764-776) 800 MHz (851-869)

Frequency Range RX 700 MHz (794-806) 800 MHz (806-823)

TX/RX Frequency Separation 30 MHz @ 700 MHz 45 MHz @ 800 MHz

Channel Spacing 25 or 50 kHz, software controlled

Receiver Type

Triple receiver, dual conversion superheterodyne architecture for 25 kHz

Triple receiver, triple conversion superheterodyne architecture for 50 kHz

Data Rate

32 kbps, firmware upgradeable to 64 kbps in 25 kHz

64 kbps to 128 kbps in 50 kHz

Sensitivity

12 dB SINAD @ -116 dBm with a 1 kHz test tone @ +/- 2/3 rated maximum

deviation

Distortion Less than 3.0% with a 1 kHz test tone @ +/- 2/3 rated maximum deviation

Operating Temperature -30 to +60 Degrees Celsius

Power Supply Voltage 13.6 +/- 15%

Current Consumption TX <10 amps, typical

Current Consumption RX <1.5 amp, typical

Number of Channels 1

Shock / Vibration Per TIA/EIA-603-A

RF Output Power 25 Watts (+/- 1 dB) @ 700 MHz 20 Watts (+/- 1 dB) @ 800 MHz

Transmitter Attack Time Less than 5.0 milliseconds

Modulation 4 to 16-Level FSK

* Specifications are subject to change.