User's Manual
MANUAL COMPONENTS
©2005 IMobileNet, Inc. Revision & Copyright HSBS User Manual
516.80540.UM-Rev. D 1-Jun-07 Page 4 of 38
Manual Purpose
The purpose of the IPSeries High Speed Base Station User Manual is to provide IPMobileNet dealers and
customers with the necessary information required to install, operate, and troubleshoot problems with the
IPSeries base station.
This manual does not provide information for every possible configuration and should be used as
a starting point of reference for general product setup and operation.
Manual Contents
This user manual contains the following sections:
Chapter 1: Introduction
The Introduction provides a description of the base station as well as a general overview of its
functionality, external features, product interfaces, product specifications, and theory of operation with
a block diagram and definitions.
Chapter 2: Basic Network Configurations
Basic Network Configurations provides a series of network diagrams depicting sample network
configurations. Each organization will need to determine their best approach for configuration.
Chapter 3: Product Setup and Preliminary Testing
Product Setup and Preliminary Testing provides a diagram and information required for mounting the
base station in a rack unit as well as preliminary testing prior to placing the base station into service.
Chapter 4: Product Installation
Product Installation provides basic diagrams and instructions for adjusting the base station’s power
and installing the base station and required components.
Chapter 5: Programming Instructions
Programming Instructions provides instructions for setting up and programming the base station and
its interfaces.
Chapter 6: Customer Support
Customer Support provides instructions for ordering parts, documentation support, and reporting
problems.
Appendix A: Backhaul Requirements
Appendix B: Base Station IPMessage Parameters
Figure Listing
Glossary
Index