User's Manual

CHAPTER 4: PRODUCT INSTALLATION
©2005 IMobileNet, Inc. Revision & Copyright HSBS User Manual
516.80540.UM-Rev. D 1-Jun-07 Page 23 of 38
Post Installation Checklist
The following table lists the tasks that should be performed upon completing installation.
TABLE 4: POST INSTALLATION CHECKLIST
NO. CHECKLIST ITEM
;
1 Scope out the entire area setup to locate any obvious problem areas.

2 Check antenna routing for safety concerns and near-field boundary setup.

3
Use tie wraps, where possible to ensure that all cables routed in parallel are
bundled together.

4 Perform appropriate testing to ensure base station works properly.

 Once installation is complete, make sure the area is clear of debris that would prevent proper
airflow and ventilation.
 No transmitter tuning or adjustments are to be performed in the field. The base station is
factory set to meet all FCC requirements as required by the base station certification.