User's Manual

CHAPTER 3: PROGRAMMING INSTRUCTIONS
Figure 8: Base Station-to-HyperTerminal Connection Diagram
NOTE
: The base station shown in the figure only displays Ethernet connectivity and is not display the
actual 700 MHz base station.
Step 2 Power on the PC.
Step 3 Power on the base station using the front panel power switch.
Step 4 On the PC’s desktop, click on the Start button and select Accessories,
Communications, and HyperTerminal.
Step 5 At the Connection Description window enter IPMNBS and click on the OK button.
Step 6 At the Connect To window, under Con
nect using: select COM1 or COM2 (whichever is
available on the computer) and click on the OK button.