User Manual

APPENDIX B: B09150-12 TEST DATA SHEET
391500 Page 18
Data Quality
Parameter
Spec Measured
Receiver 1 Data Quality
(x=1400, 19 Command IPMessage Utility)
240>
Receiver 2 Data Quality
(x=1400, 19 Command IPMessage Utility)
240>
Receiver 3 Data Quality
(x=1400, 19 Command IPMessage Utility)
240>
Exciter
Parameter
Spec Measured
Transmit Frequency Error
(Transmitting 1400 character test message)
+/- 500 Hz
Transmit Modulation Deviation
(5.3 kHz while transmitting 1400 character test
message)
5.1 kHz to 5.3 kHz
Transmit Data Quality
(While transmitting 1400 character test message
to the base station)
240>
Transmit Power Control
Warning: Do Not exceed 40 Watts RF output power during this test
Parameter
Spec RF Out RF Out Max Level set to
Output Power
(Use x=1400,19 command)
40 +/- 1 Watt
Test Check List
Test Task
Completed
(9)
Attached copy of Base Station’s Firmware Settings
Visual Inspection
Copy Base Station Settings Below: