User's Manual

COMPANY CONFIDENTIAL 110#010XA_GDE.doc

- 6 -

Warnings and Cautions

This system is designed to be operated indoors as a fixed system device and must be

located either on or near the ceiling away from the user. It must be mounted in a manner

to ensure that all users and bystanders and users are kept a minimum of 60mm away

from antennas at all times.

Do not touch or move the antenna(s) while the unit is transmitting or receiving.

Do not hold any component containing a radio such that the antenna is very close to or

touching any exposed parts of the body, especially the face or eyes while transmitting.

In most parts of the world, regulatory approval(s) are needed before the nanoBTS is

operated.

Do not connect any device other than the nanoBTS to any RJ45 socket that has been

enabled for nanoBTS connection (i.e. 48Vdc operation).

The nanoBTS is intended for dry indoor applications only. If evidence of condensation is

present do not apply power to the nanoBTS.

The nanoBTS must only be powered using a PSU supplied by ip.access.

PSUs supplied by ip.access must not be used for powering any other equipment.