User's Manual

© ip.access Ltd
COMPANY CONFIDENTIAL 110#010XA_GDE.doc
- 20 -
The RXLEV threshold should not be applied.
Click OK and start test or select NWL Start ( ) from the menu bar.
Figure 15 NWL Test Results
At the end of the test the bar chart shows the received level of signals, as shown in
Figure 15.
The received levels can also be seen in a list view by clicking on the “List View” Icon
(
).
The maximum acceptable level for any interference is -95dBm and any signal above
this and on a channel close to that planned for the nanoBTS should be investigated.
Export results to file by selecting ‘File’ ‘Export To File’ and save the file as the default
file name, which will be a combination of the units IP address and the test name to a
pre-determined directory.