User's Manual

© ip.access Ltd
COMPANY CONFIDENTIAL 110#010XA_GDE.doc
- 19 -
Figure 13 RXLEV Threshold
Select the Freq Sync Options tab and apply Frequency Sync Options.
Set drop menus to: “Report a single frequency error” and “Adjust the clock to correct the
reported errors”
Figure 14 Freq Sync Options
Click “OK and Start Test” button. Perform Test ACK is reported in the message pane.
On completion of the test, the average frequency error following adjustment will be
displayed.
Step 5. Check macro network channel usage
This test is designed to check for possible interferers with the nanoBTS
Click Channel Usage
icon followed by the properties ( ) icon and then select the
ARFCN Lists tab and check that no lists are selected.