Product Description

nanoBTS Product Description Software Specification
© ip.access Ltd Page 29
All other attributes are type 2. Those marked "Retained? == Y" are not reset to factory
defaults by insertion of the dongle.
If the EEPROM is deemed to be corrupt then the BTS attempts to send a FER as soon as
it connects (or is connected to) an OMC (see section 5.7). It shall also set the base-band
transceiver managed objects to "Disabled, Failed". The LED state should also be set to
"LED_FACTORY_RESET".
Note: Not all NV parameters are available for use by end-customers. Some are
reserved for factory or other internal ip.access use.
Note: The presence of an NV flag does not indicate support of a feature of the same
name.
Table 4 - NV Attributes
Attribute Default Value Initialised? Retained?
MAC Address 00:02:95:00:00:00
Y N/A
PCB Assembly Part
Number
"108_029"
Y N/A
PCB Assembly Issue "X"
Y N/A
HW/SW
Compatibility
0x02
Y N/A
CEM Id 0xFF
Y N/A
CEM Serial Number " "
Y N/A
IPA Serial Number " "
Y N/A
OEM Id 0xFF
Y N/A
Date and Time of
Manufacture
01/01/1900 00:00:00
Y N/A
Date and Time of
Calibration
01/01/1900 00:00:00
Y N/A
OCXO Slope 0x0000
Y N/A
Max OCXO Current
(mA)
1000
Y N/A
Default Gateway 0.0.0.0
N N
Subnet mask 0.0.0.0
N N
IP Address 0.0.0.0
N N
Primary OML Link IP
Address
0.0.0.0
N N
Primary OML Port 0
N N