Product Description

nanoBTS Product Description Hardware Specification
© ip.access Ltd Page 12
3.1.9 LED Indicator
Two LEDS are provided on the PCB. These can provide three colours (red, green,
orange) in various flash codes, as specified in section 5.8.2.
3.1.10 Labelling
Product 139
Product 165A
Product 165E
Product 165G
CE mark with associated devices.
(FCC not appropriate for 1800MHz devices)
Product 140
Product 165B
Product 165F
Product 165H
FCC mark with associated devices.
UL mark with associated devices.
(CE not appropriate for 1900MHz devices)
Product 177
Product 165D
FCC mark with associated devices.
UL mark with associated devices.
(CE not appropriate for 850MHz devices)
TA/CE certification
Product 178
Product 165C
CE mark with associated devices.
(FCC not appropriate for 900MHz devices)
Product identification
Ip.access serial number in text and bar code, product code in
text only
MAC address In text and bar code
Positioning Visible when mounted. Not positioned on front face.
OEM label Subject to separate specification and positioning
3.1.11 Chassis Bond Point
139/140 Located on rear of BTS
165 Located on front of BTS
Multi-TRX operation
BTS’s must be connected with 16AWG bonding cables
when operated as a multi-TRX.
Cable length
Maximum cable length is 1.5m. Cable length must not
exceed TIB cable length.