Product Description

nanoBTS Product Description Hardware Specification
© ip.access Ltd Page 7
Fins are also provided on the front of the unit, normally obscured by the plastic cosmetic
cover. When ceiling mounted or in any other horizontal situation, the plastic cosmetic
cover is intended to be removed to allow airflow across the front fins.
3.1.3 GSM Standards
Standards Parts Date
3GPP 11.21 Essential Compliance v8.8.0
3GPP 05.05
EGSM, Power Class P1, as
called up by 3GPP
11.21/Essential Compliance
v8.14.0
ETS 301 489
Part 8 – specific requirements for
GSM basestations
v1.1.1
For a complete and normative statement of nanoGSM system approvals and standards
compliance, see [NGSM_SOC].
3.1.4 Environmental
Operational: Temperature
Humidity
-5 ~+45C ambient
5-90% non-condensing
Storage: Temperature
Humidity
-20 ~ +80C ambient
5-90% non-condensing
Cold Start: Warm-up period from cold
In-spec operation within 10
minutes
Hot Start:
System reset without loss of power
supply
In-spec operation within 3
minutes
ETS 300-019-1-1
ETS 300-019-1-2
ETS 300-019-1-3
Storage Class 1.1
Transport Class 2.3
Operation Class 3.1
EN301-489-1
EN301-489-8
EN301-502
EMC general
Standards:
EN60950 / IEC 60950 /UL60950 Safety
Note that the 139/140 and 165 series are not hermetically sealed.
See [NGSM_APR] for complete approvals and standards compliance documentation.
3.1.5 Ethernet Interface
The Ethernet connector is 8-way RJ-45 female (screened on the 165 C/D/G/H).
The Ethernet physical layer is 10/100baseT, full-duplex, auto-negotiate.