Installation Manual

nanoBTS Installation Manual
Commission a nanoBTS
© ip.access Ltd Page 42
6. In the Connect to BTSs using SSL section, select either Optional or
Mandatory.
7. Click OK.
The Status bar at the bottom of the BTS Installer indicates that a secure connection is
possible by displaying a closed padlock.
or
If there is a problem and a secure connection is not possible, then an open padlock will be
displayed with a description of the error.
In the example above, the wrong password was entered for the eToken. Alternatively, a
secure connection may not be possible if a security certificate has not been downloaded to
the nanoBTS.
To investigate the status of BTS security:
1. Ensure that the new nanoBTS is selected in the BTS Status section, and then
click Action. The Configure BTS dialog is displayed.
2. Click Security.