Installation Manual

nanoBTS Installation Manual

Commission a nanoBTS

4.5 nanoBTS Security

BTS Installer is capable of connecting to a nanoBTS using an authenticated encrypted

SSL (secure sockets layer) connection.

Before an SSL connection can be set up you must:

• Ensure that BTS Installer in correctly installed on Windows 2000 SP2 or Windows

XP SP2.

• Install the Aladdin eToken run-time environment

• Be able to export the cryptographic technology to the BTS

1. Plug the eToken into a USB port on the local terminal. The new hardware wizard

is displayed.

2. Permit the new hardware wizard to run, and allow the system to install the

requested certificates.

3. Start BTS Installer. BTS Installer detects the eToken and prompts for a password.

4. Enter the correct password for the eToken connected to the local terminal.

5. In the Options section of BTS Installer, click Configure. The Options dialog is

displayed.