Manualshelf

Installation Manual

ManualsBrandsip.access ManualsElectronicsGSM/GPRS/EDGE/AMR picocellular base station operating at 1900MHz.
31323334353637383940
nanoBTS Installation Manual
Commission a nanoBTS
© ip.access Ltd Page 34
18. Click Set/Get NV Attributes.
19. In the Set and/or Get NV Attributes dialog, ensure that the Set NV Attributes
check box is selected.
20. Ensure that the check boxes are selected for the required configuration settings.
21. Click OK.
22. In the Configure BTS dialog, click Configure Unit ID. The DHCP, Unit ID and NV
Attributes fields in the BTS Status section should all be green.