Manualshelf

Installation Manual

ManualsBrandsip.access ManualsElectronicsGSM/GPRS/EDGE/AMR picocellular base station operating at 1900MHz.
31323334353637383940
nanoBTS Installation Manual
Commission a nanoBTS
© ip.access Ltd Page 31
4.1.2 Set the Non-Volatile Attributes
1. Ensure that the new nanoBTS is selected in the BTS Status section, and then
click Action. The Configure BTS dialog is displayed.
2. Click Set/Get NV Attributes.
3. In the Set and/or Get NV Attributes dialog, select the required attributes. By
default all attributes are selected.
4. Click OK. A progress dialog is displayed, then the BTS Configuration dialog is
displayed.