Installation Manual

nanoBTS Installation Manual

nanoBTS Hardware Installation

2.6 Power Supply Installation

Two power supply modules are available from ip.access, designed for use with the

ip.access nanoBTS product range.

The single output power supply is commonly used for single site installations. The powered

Ethernet switch is generally used at sites where multiple nanoBTS installations exist.

2.6.1 Warnings

Do not connect any device other than a nanoBTS to any RJ45 socket that is

enabled for nanoBTS connection (i.e. 48V DC operation).

Ensure that the connection to the main LAN (Server) is only made to the

UPLINK (i.e. 48V DC operation).

2.7 Single Power Supply Unit Installation

The single power supply unit is supplied as standard with each nanoBTS. The power

supply has two Ethernet connections, one for connection to the main LAN, the other for

connection to the nanoBTS.