Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 99 -
6.7.13.3 Download Certificate Revocation List
From time to time some certificates may be revoked and Certificate Revocation Lists
issued for downloading to nanoBTSs. This will prevent the nanoBTS communicating
with anything that quotes the revoked certificate.
Field Description
Enable Download Whether the download configuration phase is enabled.
Download Certificate
Revocation List
Specifies that it’s a certificate revocation list that is to be
downloaded
File Name The name of the file containing the certificate to be
downloaded to the nanoBTS. The Browse button
produces a standard file selection dialog box
Latest CRL Displays the name of the latest CRL found.
Reset BTS After Download If this is checked then the nanoBTS will be reset after
downloading the new software, and will load and run
the new software.
A Certificate Revocation List is delivered as a .sdp file with a filename that includes a
timestamp.
It is recommended that these file are installed to the same directory as the
BtsInstaller.jar file; on a Windows system this might be somewhere like:
c:\program files\ip.access\BTSInstaller
If that is done then the “Latest CRL” field will show the file name of the latest CRL file
in that directory, which will normally be the one that needs to be downloaded to the
nanoBTSs. In this case there is no need to enter anything in the “File Name” field.
However if it is desired to download a specific CRL then its name may be specified in
the “File Name” field.
To change the directory that BTS Installer searches for the latest CRL:
• put a CRL file in the desired directory
• type its name in the “File Name” field – at this point the “Latest CRL” field will
be filled in automatically
• blank out the “File Name” field again.
From now on BTS Installer will look in that directory for certificate revocation list files.
6.7.13.4 Switch Software Versions and/or Reset BTS only
When this option is selected BTS Installer queries the BTS for its software
configuration and includes a list of installed and active software versions in the log.
Field Description
Switch Backhaul Software
Versions
If this option is checked and the BTS contains two
Backhaul software images then the current image is
switched. This will take effect, ie the newly selected
image will run, next time the BTS is reset.