Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 98 -
6.7.13.1 Download Software
Attribute Description
Enable Download Whether the download configuration phase is enabled.
Download Software Specifies that it’s software that is to be downloaded
File Name The name of the file containing the software to be
downloaded to the nanoBTS. The Browse button
produces a standard file selection dialog box
(Status display) The Details button will open a dialog box displaying the
content of the selected file, see Figure 55 for an
example.
Make New Software the
Default
If this is checked then the new software will be made
the default after downloading. This means that next
time the BTS restarts it will load and run the newly
downloaded software.
Reset BTS After Download If this is checked then the nanoBTS will be reset after
downloading the new software, and will load and run
the new software.
Figure 55 - Software details dialog box
6.7.13.2 Download Certificate
It is necessary to download a personalised certificate to each BTS that is going to
communicate via a secure (SSL) connection to the BSC (and/or BTS Installer).
Field Description
Enable Download Whether the download configuration phase is enabled.
Download Certificate Specifies that it’s the nanoBTS’ certificate that is to be
downloaded
File Name The name of the file containing the certificate to be
downloaded to the nanoBTS. The Browse button
produces a standard file selection dialog box
(Status field) Displays a message if there is a problem with the
selected file.
Reset BTS After Download If this is checked then the nanoBTS will be reset after
downloading the new software, and will load and run
the new software.
Certificates for nanoBTSs are delivered in .zip files each of which may contain
certificates for several BTSs. So, if certificates are to be downloaded to several BTSs,
the .zip file may be set in the Defaults, and the correct certificate will be selected from
the .zip file to download to each BTS.