Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 93 -
Set Community String Whether to send a new value for the SNMP Community
String to the nanoBTS.
SNMP Community String A text string. Meanings of the various SNMP
configuration attributes are outside the scope of this
User Guide.
Set Trap Address Whether to send a new value of the SNMP Trap
Address to the nanoBTS.
SNMP Trap Address IP address
Set Trap Port Whether to send a new value of the SNMP Trap Port to
the nanoBTS
SNMP Trap Port Port number
Set Manager Address Whether to send a new value of the SNMP Manager
Address to the nanoBTS.
SNMP Manager Address IP address
Set System Contact Whether to send a new value of the SNMP System
Contact to the nanoBTS.
SNMP System Contact Text string