Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 8 -
3 Customer safety and regulatory information (CENG0133)
3.1 Introduction
3.1.1 Purpose and Scope
This document provides the customer with safety and regulatory warnings, cautions
and information for the IP Access range of products.
Products covered are the model 108, 110, 139, 140, 165 and 178 range of nanoBTSs,
model 109 and 126 power supplies, model 129 4U circuit switched BSC.
3.1.2 Related Documents
This document shall be referenced by the individual product’s user guides.
3.1.3 Terminology
UL Underwriters Laboratories
FCC Federal Communications Commission
ICE Industry Canada
CE European Union
3.1.4 Change Control
Changes to this document shall be agreed and implemented according to the ECN
procedures described within QS019, Approvals Liaison Engineer signature is required
in all cases.
3.1.5 Document Organisation
This document is divided into sections by product type.