Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 7 -
1 Introduction
1.1 Purpose and Scope
This document provides the reader with all the necessary information required to
install the ip.access nanoBTS. The document provides step-by-step instructions for the
hardware installation, PSU Installation and BTS Installation and configuration steps of
required to bring the BTS into service.
1.2 Related Documents
This document comprises:
Reference
Number
Document Title Description
1 CENG0133 Customer Safety and Regulatory Information
2 CENG0210 Hardware Installation – BTS
3 CENG0033 PSU Installation Guide
4 CENG0048 BTS Installation User Guide
2 Overview
This document takes the user from unpacking a BTS from it’s box, installing the BTS
onto a wall/ceiling then using BTS Installer to configure the BTS to communicate with
the BSC.