Installation Instructions

Table Of Contents
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 41 -
Download certificate revocation lists to the nanoBTS from time to time
BTS Installer contains tools to carry out all these actions. It can do so
To one nanoBTS at a time or several nanoBTSs at once.
Automatically or manually.
According to information either loaded from a configuration file or entered via
the graphical user interface.
To allocate IP addresses and other IP configuration to nanoBTSs, BTS Installer
contains a built-in DHCP server. This will respond to requests from nanoBTSs only, so
should co-exist with any other DHCP servers that are present on the same network.
In addition BTS Installer contains a Network Listen tool that enables you to control a
nanoBTS to:
Listen to its GSM band and report on received signal strength and BCCH
details for each ARFCN.
Correct its clock by reference to the signals from other cells.
Transmit a beacon signal that can be listened to and measured by other
nanoBTSs, which can be useful in ensuring adequate coverage of an area.