Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 38 -
5.3.2 8 Port Powered Ethernet Switch
The 8 port powered Ethernet switch, is a combined power inserter, for use with the
ip.access range of products and a fully functional 10/100 Ethernet switch.
Figure 21 – The 8 Port Powered Ethernet Switch
Power to the unit is provided via a 110 – 240 volt ac mains plug or via a 48-volt dc plug
and housed in a 1U 19” rack mount case.
5.3.2.1 Mounting The 8 Port Powered Ethernet Switch
The unit is designed to be mounted within a standard 19” rack, and occupies just 1U
height, with all connections accessible from the front panel.
Insert 4 cage nuts in the 19” equipment rack at the height and location that the 8 Port
Powered Ethernet Switch is to be positioned.
Taking care, slide the 8 Port Powered Ethernet Switch into location, holding the switch
steady, then with 4 mounting screws, secure the 8 Port Powered Ethernet Switch into
the rack.
5.3.2.2 Connecting The 8 Port Powered Ethernet Switch
Connect “ONE” of the required power input connectors to the 8 Port Powered Ethernet
Switch, either mains 110/240V ac or 48V DC.
Figure 22 - Supply Connections
Once the 8 Port Powered Ethernet Switch is mounted and the mains / DC supply is
connected, the main network can be connected, as shown in Figure 23. When
powered from the AC
mains, ensure the unit is earthed via the IEC power cord. When
powered from a 48VDC supply, ensure the unit is earthed via a cable to the screw
terminal.
48Volt dc Mains 110 – 240 V AC