Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 135 -
6.11.8 Download Configuration Phase
Here is the full list of parameters relating to the download configuration phase:
Name Type What
Download
Boolean whether to run the software
download configuration phase
DownloadWhat
Number Indicates what to download:
0 => download software
1 => download certificate
2 => download CRL
3 => switch software versions and/or
reset BTS only
Filename
String Name of file containing software to
download
MakeDefault
Boolean Whether to make the newly
downloaded software the default
ResetBtsCode
Boolean Whether to reset the nanoBTS after
downloading software
CertFilename
String Name of file containing certificate to
download
ResetBtsCert
Boolean Whether to reset the nanoBTS after
downloading a certificate
CrlFilename
String Name of file containing certificate
revocation list to download
ResetBtsCrl
Boolean Whether to reset the nanoBTS after
downloading a certificate revocation
list
SwitchBackhaul
Boolean Whether to switch Backhaul software
versions
SwitchTrx
Boolean Whether to switch TRX software
versions
ResetBtsSwitch
Boolean Whether to reset the nanoBTS after
switching any selected software
versions