Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 120 -
6.8.8.1 Test Settings
Selecting the Beacon Information tab allows you to view and change the settings
shown in Figure 71.
Figure 71 - Transmit Beacon Properties
Control Description
ARFCN Determines the RF channel on which the beacon is to
be transmitted. This must be a valid ARFCN for the
Frequency Band selected at the top of the Network
Listen window.
NCC The Network Colour Code which should be transmitted
on the Synchronisation Channel. The valid range is 0..7.
BCC The Base Station Colour Code which should be
transmitted on the Synchronisation Channel. The valid
range is 0..7.
Absolute Power The power level, in dBm, at which the beacon signal is
to be transmitted. In order to prevent invalid values from
being entered, this field can only be changed using the
spin controls.
The Advanced tab is described in section 6.8.3.4. For the Beacon Transmit test it
might sometimes be use
ful to set the Test Duration on the Advanced tab to specify
how long the test will run; otherwise the nanoBTS will transmit until you select the
Stop Test button.