Installation Instructions
Table Of Contents
- nanoBTS Installation and Test Manual
- 1 Introduction
- 2 Overview
- 3 Customer safety and regulatory information (CENG0133)
- 4 BTS Hardware Installation (CENG0210)
- 5 PSU Installation Guide (CENG0033)
- 6 BTS Installer User Guide (CENG0048)
- Introduction
- 6.2 Capabilities
- 6.3 Concepts
- 6.4 Getting Started
- 6.5 User Interface Reference
- 6.6 The DHCP Server
- 6.7 BTS Attribute Reference
- 6.7.1 The BTS Configuration Dialog box
- 6.7.2 Current Values Display
- 6.7.3 Identifying a nanoBTS
- 6.7.4 How Defaults Work
- 6.7.5 Enabling Configuration Phases
- 6.7.6 The BTS tab
- 6.7.7 The DHCP tab
- 6.7.8 The Unit ID tab
- 6.7.9 The NV Attr (1) tab
- 6.7.10 The NV Attr (2) tab
- 6.7.11 The NV Attr (3) tab
- 6.7.12 The NV Attr (4) tab
- 6.7.13 The Download tab
- 6.8 Using Network Listen
- 6.9 Using BTS Installer via a proxy
- 6.10 Connecting to a nanoBTS via SSL
- 6.11 Configuration File Reference
© ip.access Ltd
COMPANY CONFIDENTIAL CENG0336_XE_nanoBTS_Installation_and_Test_Manual.doc
- 113 -
Control Description
Frame Number Offset If ticked, the measured Frame Number Offset will be
reported. The Frame Number Offset is measured in
units of a whole GSM frame, and is an unsigned 32 bit
integer, which does not exceed 2715647 (2715648
being the number of frames in a hyperframe
51*26*2048). It is the amount by which the nanoBTS
Frame Number exceeds the monitored channel’s
Frame Number.
BSIC If ticked, the decoded Base Station Identity Code will
be reported. The BSIC has two components: the
Network Colour Code (NCC) and the BTS Colour
Code (BCC). BTS Installer displays the values of NCC
and BCC separately.
Cell Global Identity If ticked, the decoded Cell Global Identity (CGI) will be
reported. The CGI has four components: Mobile
Country Code (MCC), Mobile Network Code (MNC),
Location Area Code (LAC), and Cell Identity (CI). BTS
Installer displays the values of MCC, MNC, LAC, and
CI separately.
BA List – SysInfo 2 If ticked, the BCCH Allocation List decoded from
SysInfo 2 will be reported.
BA List – SysInfo 2-bis If ticked, the BCCH Allocation List decoded from
SysInfo 2-bis (if available) will be reported.
BA List – SysInfo 2-ter If ticked, the BCCH Allocation List decoded from
SysInfo 2-ter (if available) will be reported.
Cell Allocation List If ticked, the Cell Allocation List decoded from SysInfo
1 (if available) will be reported.