Installation Manual

© ip.access Ltd Page 8 of 12
COMPANY CONFIDENTIAL CENG0210_XB Hardware Installation -
nanoBTS.doc
1.7.3 Earth Strap – Multi-TRX only
When the nanoBTS is operated in a Multi-TRX configuration, each of the nanoBTS
must be connected together using the supplied earth kit.
To fit the earth strap, remove the nanoBTS from the mounting plate
Using the screw provided, screw the Earth Strap to the stud on the rear of the
nanoBTS, see Figure 10 - Earth Stud.
Earth
Stud
Figure 10 - Earth Stud
Connect the other end of the Earth lead to the next nanoBTS Earth stud in the chain.