User's Manual

nanoLTE E40 AP Product Description Product Details
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 4
3 Product Details
3.1 RF Capabilities
The E40 is Quad Band for both EU and US. See section 2 for band support.
3.2 Throughput Performance
The E40 platform is capable of high speed data transfer to LTE capable devices.
The platform is software upgradeable to support the following enhancements:
• Up to 16 simultaneous RRC Connected LTE users
• Up to 75Mbps peak downlink data (software upgradeable to 100Mbps)
• Up to 25Mbps peak uplink data (software upgradeable to 37.5Mbps)
• GBR/non-GBR bearer support
Note: The specified data rates are for a single user and relate to air interface performance
assuming an ideal radio channel. The data rates achieved at the application layer may vary
subject to radio conditions, available backhaul bandwidth and number of simultaneous
active users.
3.3 Operational Range
With the standard antennae, the nanoLTE E40 AP has an approximate maximum range of
700m with 0dB path loss.
3.3.1 Long Range Extension (LRE)
The LRE feature provides the option to increase the range of the nanoLTE AP by
connecting the AP to an external PA. The maximum range is approximately 4km. This is
configuration dependent.