User's Manual

nanoLTE E40 AP Product Description Key Features
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 2
2 Key Features
The key features of the nanoLTE E40 AP are:
Feature Details
3GPP Compliance Compliant to [36.104].
Number of RF Carriers Single Carrier.
Bandwidth The nanoLTE AP supports the following bandwidths:
•5MHz
•10MHz
•15MHz
•20MHz
MIMO 2x2 MIMO-Single User Downlink only.
RF Average Output Power 2 x +21dBm (2 x 125mW).
Max Data Rate Throughput In N4G_1.1, the supported maximum data rates are 75Mbps
DL and 25Mbps UL over the air.
The maximum throughput achievable also depends on the
bandwidth configured and local radio conditions.
The nanoLTE E40 AP is software upgradeable to 100Mbps
DL and 37.5Mbps UL.
Simultaneous # Active Users Up to 16 RRC Connected Users.
Network Interfaces S1 over IP, X2 Interface is planned as a Software update.
Electrical Supply 12V @ 1.7A from external power supply.
Modes supported FDD-LTE.
3GPP Frequency Bands (for LTE
operation, or for LTE or WCDMA
Network Listen)
EU 248J and 278J variants:
• Band 1 (2100 MHz)
• Band 3 (1800 MHz)
• Band 7 (2600 MHz)
• Band 20 (800 MHz)
EU 248L and 278L variants:
• Band 3 (1800 MHz)
• Band 7 (2600 MHz)
• Band 8 (900 MHz)
• Band 20 (800 MHz)
US 248M and 278M variants:
• Band 2 (1900 MHz)
• Band 4 (2100 MHz)
• Band 13 (750 MHz)
• Band 17 (740 MHz)
Operation Single band operation, configured via OA&M.