User's Manual

nanoLTE E40 AP Product Description Compliance to Standards
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 11
4.3 Transportation
The nanoLTE Access Point complies with the following standard for transportation:
• EN 300 019-1-2 "Class 2.3 Public Transportation".
4.4 Safety
The nanoLTE Access Point complies with the following standard for safety:
• EN60950-1:2006 Safety of information technology equipment Including Electrical
Business Equipment.
4.5 Hardware Equivalence for 248 and 278 Product Variants
The 248 and 278 product variants have an identical hardware build for each set of
supported bands. Hence the hardware build is identical in each of these cases:
• 248J and 278J
• 248L and 278L
• 248M and 278M
The only difference between 248 and 278 variants is that internal fuses within the processor
are configured on the 278 variants in order to store unique security information, allowing the
product to boot up securely.
Note: To implement the added security, the software/firmware has been adjusted for the 278
variants. Product operation and in particular the RF operation of this variant is not altered in
any way. The RF Technology (LTE), frequencies and power level are identical between both
variants.
In respect of the 248M and 278M variants of the nanoLTE E40 AP, ip.access has reviewed
the Software Changes section of the FCC Permissive Changes Document dated 16th Oct
2015. It has been determined that the difference between these two product models can be
classed as a permissive change.