User's Manual

nanoLTE E40 AP Product Description Compliance to Standards
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 10
4 Compliance to Standards
Any nanoLTE Access Point equipment installed on site conforms to the Essential
Requirements of the R&TTE Directive 1999/5/EC and is subject to the legal requirements
set by the local authorities.
The equipment is required to fulfil fire load requirements (describing the energy that the
equipment would add to a fire) in accordance with EN 60950. The fire load shall not
increase with future changes to the hardware.
The nanoLTE Access Points have CE marking.
4.1 Electromagnetic Compatibility (EMC)
The nanoLTE Access Points comply with the following standards and specifications:
• EN 61000-4-2 Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques Section 2: Electrostatic discharge immunity test Basic
EMC Publication.
• EN 61000-4-3 Electromagnetic compatibility; basic immunity standard: radiated,
radio frequency electromagnetic fields; immunity test.
• EN 61000-4-4 Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques Section 4: Electrical fast transient/burst immunity test
Basic EMC publication.
• EN 61000-4-5 Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques Section 5: Surge immunity test.
• EN 61000-4-6 Electromagnetic compatibility; basic immunity standard: conducted
disturbances induced by radio-frequency fields; immunity test.
• EN 61000-4-11 Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques Section 11: Voltage dips, short interruptions and voltage
variations immunity.
• EN 301 489-1: Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services.
• EN 301 489-23: Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services.
• 3GPP TS36.104: 3rd Generation Partnership Project; E-UTRA Base Station (BS)
radio transmission and reception; LTE FDD.
4.2 Storage
The nanoLTE Access Point complies with the following standard for storage:
• EN 300 019-1-1 Class 1.1 “Partly temperature-controlled storage".