User's Manual

nanoLTE AP Hardware Installation nanoLTE E40 AP Hardware Installation
NANO_INST_43311 v101_0.2 for N4G_1.1 © ip.access Limited 2016 Page 10
3.3 Cable Connections
The nanoLTE E40 AP requires an Ethernet cable connection to the backhaul and power
from the mains via the supplied power adapter:
A mains socket providing power to the AP must be within reach of the cabling included with
the PSU. This is typically less than 1.5m. The PSU for the E40 AP is supplied.
Note: The nanoLTE E40 AP cannot be powered with PoE or PoE+.
E40
AP
LAN Cable to
nearest switch/gateway
(max 100m)
Mains
Input
12V DC
cable to AP
Backhaul
Network to
NOS and EPC