User's Manual

nanoLTE AP Hardware Installation nanoLTE E40 AP Hardware Installation
NANO_INST_43311 v101_0.2 for N4G_1.1 © ip.access Limited 2016 Page 9
3) Lift off the cover:
4) To refit the cover, simply place it in position and press down gently until the cover
securely snaps into place.
The antennas must be oriented perpendicular to the unit, as shown, so that the
cover fits correctly without stressing the connectors.
To fit external antennas, first remove the plastic cover from the antenna side of the
unit. Unscrew the antennas to expose the SMA connectors. Connect external
antennas directly to the SMA connectors. Route the cables through the gap in the
back cover, then refit the cover.