User's Manual

nanoLTE AP Hardware Installation nanoLTE E40 AP Hardware Installation
NANO_INST_43311 v101_0.2 for N4G_1.1 © ip.access Limited 2016 Page 7
3 nanoLTE E40 AP Hardware Installation
3.1 Unpack the E40 AP
1) Unpack the AP and its accessories.
Box contents may vary, but typically the box should contain the following:
• E40 AP unit with wall bracket attached
• Extraction tool for removing the AP from its wall bracket
• Mains power supply unit
2) Check that the serial number on the AP unit matches the label on the box.
3) Check that the items have not been damaged in transit.
For any damaged units, contact the supplier immediately for returns advice.