User's Manual
Table Of Contents
- nanoLTE AP Pre-Provisioning and Configuration
- Table of Contents
- 1 Introduction
- 2 Pre-Provisioning Overview
- 3 Capturing Network Policies and AP Modes
- 4 AP-Unique Parameters
- 5 System Preparation for nanoLTE AP Provisioning
- 6 Template Preparation
- 7 AP Provisioning
- 8 How to Implement Policies
- 9 Installation Checks
nanoLTE AP Pre-Provisioning and Configuration Installation Checks
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 64
5) Check the values of the SW Version attribute:
6) If the AP does not have the latest software image, download it to the AP from the
NOS Server according to the instructions in section 9.1.2.
9.1.2 Download the Latest Software Image from the NOS Server to the
AP
For instructions about how the software images (SDP files) are uploaded to the NOS
Server, see section 5.4.
1) Select Device.DeviceInfo. for the AP object and verify that the Filesys version
reported by the Software Version matches the SDP file that was downloaded.
2) Select the AP's parent AP Info object.
3) Click the Select button for the Associated Provisioned SW Version attribute.
4) Find the new AP SW Version object in the list and click OK.
5) Click Apply to save the changes.
6) Right-click the AP Info object and select Actions > Connect Now. The AP will be
updated to the new software version immediately.