User's Manual

nanoLTE AP Pre-Provisioning and Configuration Installation Checks
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 63
9 Installation Checks
All the activities in this section are managed from the NOS Client.
Use the procedures in this section to ensure the AP is correctly configured. For
troubleshooting information, see [TRB_43005].
The activities in this section assume that the AP has now been powered up and connected
to the backhaul.
The topics in this section are:
• 9.1 Check and Upgrade the nanoLTE AP Software Image
• 9.2 Configuration Audit
• 9.3 Ensure the AP is in Service
9.1 Check and Upgrade the nanoLTE AP Software Image
This is a useful check to ensure that the AP has the required software version, even if the
AP software was recently updated during commissioning or provisioning.
Note: The download of any required software is automated in the NOS for TR-069 by specifying
the correct Product Class during Site creation.
9.1.1 Check the Current Software Image Version
1) Login to the NOS Client with a user name (and password) that has Full Access
rights for changing the AP's configuration.
2) Use AP filtering to make the required AP visible in the object tree in the Explorer
Pane.
Note: For details on using AP filtering, see [OPM_43005].
3) Either select the AP’s parent AP Info object in the search results, or find the
required AP within the LTE APs area.
For example, drill down to the AP like this:
Root > APs > LTE APs > AP Info > AP
Note: For full information on using the NOS Client, see [OPM_14015].
4) In the Navigation pane, browse to Device.DeviceInfo..