User's Manual

nanoLTE AP Pre-Provisioning and Configuration How to Implement Policies
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 59
8.3 Periodic Inform Interval
The following tables summarise the recommended minimum and recommended values for
setting the Periodic Inform Interval for Enterprise and SOHO APs. These values assume a
population of consisting only of the specified AP type. If a mixed population is in use then
calculate a pro-rata value.
These initial recommendations are based on typical estimated behaviour. As the network is
deployed the aggregate inform rate should be monitored and the Periodic Inform Interval
adjusted if needed to keep within NOS limits.
The default value for Device.ManagementServer.PeriodicInformInterval is 43200 seconds,
which is 12 hours.
When using a network-wide Periodic Inform Interval that is different to the default, use a
template associated with the Product Class to apply this to all APs during pre-provisioning.
8.3.1 Enterprise nanoLTE APs
8.3.2 SOHO nanoLTE APs
APs in the Network Minimum Inform
Interval
Recommended Inform
Interval
<=5,000 15 mins 30 mins
5 - 10,000 30 mins 60 mins
10 - 15,000 1 hour 2 hours
APs in the Network Minimum Inform
Interval
Recommended Inform
Interval
<=5,000 30 mins 60 mins
5 - 15,000 1 hour 2 hours
15 - 30,000 3 hours 6 hours
25 - 50,000 6 hours 12 hours (default)