User's Manual

nanoLTE AP Pre-Provisioning and Configuration AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 53
7.4.2 Load a Configuration File for the AP
For information on preparing a configuration file for an AP, see [OPM_43005].
1) If the AP is not currently visible, use AP filtering to make the required AP visible in
the object tree in the Explorer Pane.
Note: For details on using AP filtering, see [OPM_43005].
2) To start the NOS Load Attributes Wizard, right-click on the AP object in the NOS
Client and then select Load Attributes From File. The Load Attributes From File
Wizard shows the chosen AP object:
3) Choose From server file or From local file, according to the location of the
required configuration file.
4) Click the Browse button then use the file browser to select the edited
configuration file.
5) Click the Load or Open, according to which file browser is in use, and the file
name is shown in the Load Attributes wizard. Click Next>>.
6) By default the operation is scheduled for Now, so click Finish to load and apply the
configuration settings. The AP configuration held in the NOS database is updated.
The AP will pick up the updated configuration when it connects to the NOS for the
first time.
7) Repeat as needed, if there are multiple configuration files.