User's Manual
Table Of Contents
- nanoLTE AP Pre-Provisioning and Configuration
- Table of Contents
- 1 Introduction
- 2 Pre-Provisioning Overview
- 3 Capturing Network Policies and AP Modes
- 4 AP-Unique Parameters
- 5 System Preparation for nanoLTE AP Provisioning
- 6 Template Preparation
- 7 AP Provisioning
- 8 How to Implement Policies
- 9 Installation Checks
nanoLTE AP Pre-Provisioning and Configuration AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 50
7.3.5 Select NTP Servers
21) The page for selecting NTP servers will appear:
All four NTP server addresses must be selected, as required by the AP’s NTP
algorithm for setting its time and date.
The NTP servers may have been automatically selected from either a template
associated with the Product Class or a template selected in the Template page of
the wizard. Any changes on this page of the wizard will override settings from a
template.
22) Click the drop-down lists to choose the four NTP server addresses for the AP. The
the available Meinberg NTP Servers are defined under Root > Southbound SNMP
Interfaces and/or any generic NTP Servers are defined under Root > NOS > NTP
Servers.
23) Click Next>>.