User's Manual

nanoLTE AP Pre-Provisioning and Configuration AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 49
16) Choose the required Tracking Area Code from the drop-down list.
17) Click Next>>.
• If there are any errors on this page, the error will be displayed and the wizard
will stay on the AP identity details page. For example, the identification
details are checked to ensure there are no duplication conflicts with existing
APs. Edit the required field(s) to correct the errors then click Next again.
• The wizard will go to the next page if there are no errors.
7.3.4 Set the AP Location
This is required by the Static Neighbour List Wizard, to determine candidate neighbours
that are near the AP’s location.
18) To provide the location of the configured AP, enter the Latitude, Longitude and
Radius of Uncertainty in the appropriate fields. If the deployment location
If the AP’s deployment location is not currently know, leave these fields blank.
Alternatively, if the approximate destination location is known, enter a suitable
approximation for the coordinates and a larger Radius of Uncertainty.
Note: This sets the location in both the AP object (in Device.FAP.GPS.) and its
parent AP Info object (in LTE AP Info Package).
19) Click Next>>.
20) If the location is not specified, a warning message will appear. Click OK to clear the
message: